EUROMANGUERAS, S.L.
C/.Roble, 11 Polig. Ind. San Sebastian - E28950-MORALEJA DE ENMEDIO - MADRID - ESPAÑA - Telef. +34 916 093 464
Fax +34 916 093 098 - E.mail : infomangueras.com
PRESENTACION NUESTRA EMPRESA
JJB EUROMANGUERAS, S.L. it is a company young, modern and dynamic, been founded in 1996 and located in one of those bigger industrial areas of Madrid. With a personnel highly qualified for the production, commercialization, manipulation, assembly and repair of hoses, so much of rubber, of p.v.c, inox, as well as of the denominated type composite; (compound), with an experience in the sector of the production, distribution and industrial supply of more than 30 years
From our beginnings have specialized in the Technical Hoses, as well as in the quick couplings and fittings, focusing our efforts toward the industry in general, but very especially to the industries, ALIMENTARY, CHEMICAL, OIL, NAVAL, HYDRAULIC, MINING, INDUSTRIAL SUPPLIES, HARDWARE STORES AND ENGINEERINGS. In definitive there where it is necessary transvasar any type of product, I either liquidate, accustomed to or gassy, rot to have our experience, in the security that we will be able to him to offer the best
solution.r solución.
See partial our instalations

With everything it, we can offer one of those but wide ranges of the National and European market, in hoses of rubber, pvc, composite, stainless steel, flat teflon and corrugated, etc, as well as of the systems of quick couplings and accessories more common of the market. Having a commitment with our clients of

QUALITY - SERVICE AND WARRANTY
We have the technical means but modern of the sector, with machinery of last generation. The pressed or crimped of the hoses can carry out them
from 1/4" up to 10"; of diameter, so much in hoses of rubber, as COMPOSITE, we have test Bank equally hydraulics, and marked end of the product finished for their correct one trazabilidad. For us it is primordial that our clients have the biggest trust in our products, for we guarantee it the hoses that we mount in our dependences, proving and emitting the one corresponding certificate of Tests, and it stops complete rolls or couplings, if it is requested this way we emit the corresponding Certificate of Quality. All the hoses mounted in our shops, come out properly marked and identified for their appropriate trazabilidad.
With reason of always giving the best products in the market, as well as to have those that our trial, those that are of more acceptance, of the different sectors with those that operate, in JJB EUROMANGUERAS, we have taken care a lot of the quality of the products that we manufacture with our mark JJB, as well as those that we distribute or we market, selecting those that gather the best conditions of quality and service, without forgetting for it the best price.

Machine for 4"
Machine for 10"
Everything has taken us to it logically to mount one infrastructure in our dependences that it gathers the requirements necessary to be able to offer our clients a quality and guarantee of those but you complete of the market, with suppliers certificates in their majority with the international norms ISO-90001. With this thoughts and facts, you toward necessary to base us on those norms of quality ISO-9000, which are totally today developed in all the areas of our company, there being obtained the certification according to the norms
ISO-9002, and having adapted us to the ISO-9001 and the IN-14001


Among others procedures, it is necessary to highlight that of the hydraulic tests that we carry out to all the hoses that we mount in our shops and until of 2500 Bar, for personal properly well educated and qualified,
that it guarantees the total estanqueidad of the assembling or crimping of the couplings to the hoses.
Tests that we carry out in industrial hoses to low pressure, up to 150 maximum Bar, or in hydraulic hoses, up to 2500 bar maximum. Everything it with controls of the different components that we use for the rehearsals, (manometers, bombs, couplings, etc) Properly identified and specially ruled manometers and proven regularly with models identical " master " that they confirm us the possible drifts in the mensurations, for
to adopt the opportune rectfications.
Everything implies it a bigger control on the correct reception of those materials, as well as their storage and the later assembly of those components that impact in the completed product
The production of the hoses this properly controlled one, by means of the systems but modern of production in our it manufactures. The assemblies are made by means of anyone of the systems well-known, with bands of security DIN-2817, or bands STANDARD, ligaturados with wire of galvanized steel, for hoses against-fires, pressed or crimpring for hoses industrial, composites and hydraulic, being able to carry out these of 1/4" to 10". as well as the welding that we can carry out in TIG low argon and in MIG. And with practically all the well-known and used, such systems as GUILLEMIN, CAMLOK (KAMLOK), STORZ, BARCELONA, FLANGES DIN or ASA
AND FITTINGS MALES, FEMALES, DIN-11851, TW, CLAMP, ETC.
The different ones products that we manufacture and we market, there are them I divide in several families that he/she rots to find in the index, in this small summary seek to guide them on those but significant, without for we leave aside it any challenge that let us be presented.
In hoses of RUBBER, we have one of those but wide ranges that it embraces all the sectors with those that operate, from the transport of products
pulvurulentos, such as cement, sand-blast, jet of sand, etc., or in version atoxic for flours, cereals, screenings, etc. In hoses for the alimentary industry where we have approvals FDA, BGA, RAL, for conductions of milk, juices, eatable oils, wines, etc. being also prominent the approval for hoses
of beer. Hoses for very aggressive chemical products, of high benefits, as well as it stops hydrocarbons, mineral oils, air, it dilutes, gases, etc, in short a complete range that almost covers all the possibilities of the market. Being equally important those special productions, in diameters of up to 900 mm, for discharge of ships, in anyone of the mentioned versions.
In the hoses COMPOSITE, COMPOTEC, we prepare of one of the ranges but you complete of the market, and that equally they cover all the sectors with those that we work. Sectors of the industry CHEMISTRY, OIL, ALIMENTARY, etc, where I eat examples, we can to offer the hose PTFE-300 with teflón interior, of unbeatable behavior before very aggressive chemical agents, or the FOOD-500 with approval FDA.
Hoses leaders in Europe, inside the sector of those manufactured to base of polypropilenes layers whose nimbleness, flexibility and great stability in front of the different products to transvasar, they make them
a very competitive, reliable option and of high benefits. All manufactured low international and European norms, and certified CE
As it is obvious, we are not able toto forget the great range of the hoses of PVC and Termocaucho, where we can assist any necessity, from the one I water and gardening, until chemical products, fumigation, autoflotantes for pools, plane hoses for agricultural waterings of great flow, I oxygenate, acetylene, dilutes, butane, air, wines, milk, hoses against-fires, etc., in definitive a wide fan of benefits that we prepare for the industries and sectors like Hardware stores, industrial Supplies, etc., and that they are an option economic and enough for many services of the industries. Equally we can make special productions according to those the client's necessitie
We have pipe equally metallic flexible of STAINLESS steel, flat teflón and corrugated, where we can offer executions with an or two braids, in their versions PARNOR and PARRAP of more flexibility, and that it embraces diameters from 1/4 up to 6 and welding in the ends any terminal type that is required, Also
we have a wide range of pipes of flat TEFLON or corrugated with braid textile or metallic

In HYDRAULIC hoses we can carry out assemblies of the different terminals, and in different types of hoses, with one, two and up to 6 braids. Terminals of steel carbon, with threads BSP (GA) JIC, Flanges, flat terminals of welding, etc.
Equally we can give the loose elements, hoses, terminals and case of having pressed. We also prepare of you SCHEME them of having pressed and crimped, as well as it cuts, peeled, etc, to carry out the tubes assembly. You scheme electric, of 380V, 220V, and 12V, manuals.
As for the teminals or COUPLINGS, we have an more range, and of which we have stock enough to assist the necessities that have our clients, with some relatively short delivery terms. Very well-known and extended quick systems, such as GUILLEMIN, CAMLOK, EXPRESS, STORZ, BARCELONA, BAUER, DIN-28450 TW, KAMVALOK, TODOMATIC, DIN-11851, CLAMP, ENOLOGICOS, ETC.
The same ones can be mounted in the different types of hoses existent, in anyone of the materials in that you/they are manufactured, ALUMINUM, BRASS, STAINLESS OR POLYPROPILENE. Also we manufacture our own couplings with own lathes CNC and PARALLEL, adapted to our hoses. We carry out works equally under plane of pieces you specify of the client. .
Bands, hose winders, canyons of hot air, valves, compensadors, irons and rubber pavement, band stanleis steel BAND-IT, lubricant, as well as
VARIOUS articles, compose our wide one it offers.